Effect of infill Parameter on compression property in FDM Process T Abbas, FM Othman, HB Ali dimensions 12 (12.7), 25.4, 2017 | 95 | 2017 |
Influence of layer thickness on impact property of 3D-printed PLA TF Abbas, FM Othman, HB Ali Int. Res. J. Eng. Technol.(Irjet) 5, 1-4, 2018 | 42 | 2018 |
Influence of process parameters on mechanical properties and printing time of FDM PLA printed parts using design of experiment FM Othman, T Fadhil, AHB Ali J. Eng. Res, 2248-9622, 2018 | 32 | 2018 |
The Effect of Process Parameters on the Compression Property of Acrylonitrile Butadiene Styrene Produced by 3D Printer NAN Sabreen A. Oudah*, Hind B. Al-Attraqchi engineering and technology journal 40 (1), 189-194, 2022 | 9 | 2022 |
Compressive and Tensile Properties of ABS Material as a Function of 3D Printing Process Parameters FMO Hind B. Ali* ,Jawad K. Oleiwi Revue des Composites et des Matériaux Avancés 32 (3), 117-123, 2022 | 8 | 2022 |
Effect Of Reinforced by Coconut Fiber Core on The Mechanical Properties for Un-Saturated Polyester Matrix Composite Material HB Ali Engineering and Technology Journal 31 (17), 2013 | 7 | 2013 |
Influence of Layer Thickness on Compression Property of 3D-Printed PLA DTF Abbas, DFM Othman, HB Ali Al- Muhandis Journal (JMISE) 154 (4), 41-48, 2017 | 6 | 2017 |
The Effect of FDM Process Parameters on the Compressive Property of ABS Prints HBA Tahseen Fadhil Abbas, Khalida Kadhim Mansor Journal of Hunan University (Natural Sciences) 49 (7), 154-162, 2022 | 5 | 2022 |
INFLUENCE OF FDM PROCESS VARIABLES'ON TENSILE STRENGTH, WEIGHT, AND ACTUAL PRINTING TIME WHEN USING ABS FILAMENT. TF Abbas, HB Ali, KK Mansor International Journal of Modern Manufacturing Technologies (IJMMT) 14 (1), 2022 | 5 | 2022 |
INVESTIGATION AND ANALYSIS OF INFILL DENSITY ON IMPACT PROPERTY OF PLA IN 3D PRINTING HBA Dr.Tahseen Fadhil Abbas , Dr.Farhad Mohammad Othman INTERNATIONAL JOURNAL OF RESEARCH SCIENCE & MANAGEMENT 5 (2), 115-121, 2018 | 5 | 2018 |
Effect of Chloride Ions on the Corrosion Behavior of Al – Zn Alloy in NaOH Solution at Four Different Temperatures RA Anaee, HB Ali, HA Smaeej Al-Khwarizmi Engineering Journal 4 (4), 26-36, 2008 | 5 | 2008 |
Experimental Study and Mathematical Modeling for Corrosion ofAmalgam at Different Periods RA Majed, KA Ali, HB Al-Atrakchy, HD Al-Deen Tikrit Journal for Dental Sciences, 30-37, 2014 | 3 | 2014 |
Influence of layer bonding on compressive strength of 3D printed structure: An experimental study DRA Hind B. Ali Sustainable Engineering and Innovation 4 (1), 76-81, 2022 | 2 | 2022 |
Characterization of fatigue properties of 3D printed polylactic acid HB Ali, DR Alazawi Periodicals of Engineering and Natural Sciences 10 (3), 334-340, 2022 | 1 | 2022 |
Effect of nickel–Graphene addition on the 3D printed 17-4 PH stainless steel AA Muhsan, HB Ali, MS Hamza, RA Anaee Results in Engineering 20, 101612, 2023 | | 2023 |
Characterization of Ni-base Matrix Composite Coating produced by Thermal Spray Technique H A Al-Kaisy, N Jamal Abdulkader, M F Khdheer, H B Ali Journal of Nanostructures 13 (2), 453-461, 2023 | | 2023 |
Experimental investigation and statistical modelling for assessing the sliding wear of Futilized Filament Fabrication (FFF) fabricated parts SKH Hind B. Ali, Haider Basil Ali, Mukhallad H. Shawish Periodicals of Engineering and Natural Sciences 11 (2), 248-261, 2023 | | 2023 |
Continuous Quality Improvement in Health Care literature review HBA Sara Mohammed AL-waheed a, Sawsan S A Al-Zubaidi b International Conference on Science, Engineering Management and Information …, 2022 | | 2022 |
MULTI OBJECTIVE OPTIMIZATION OF FUSED DEPOSITION MODELLING PROCESS FOR IMPROVING PRODUCT QUALITY SA Oudah, HB Ali, NA Nassir | | 2022 |
EFFECT OF CIGARETTES SMOKING YIELDS ON CORROSION BEHAVIOR OF AMALGAM IN ARTIFICIAL SALIVA AT PH= 6.2 AND 37 C RA Majed, MH Abdulmajeed, HB Al-Atrakchy, SI Ibrahem, MM Sadeq International Journal of Current Research 6 (11), 9657-9663, 2014 | | 2014 |