Simultaneous enhancement of strength, ductility, and hardness of TiN/AlSi10Mg nanocomposites via selective laser melting C Gao, W Wu, J Shi, Z Xiao, AH Akbarzadeh Additive Manufacturing 34, 101378, 2020 | 133 | 2020 |
Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of SLM titanium alloy Z Wang, Z Xiao, Y Tse, C Huang, W Zhang Optics & Laser Technology 112, 159-167, 2019 | 133 | 2019 |
Selective laser melting of TiN nanoparticle-reinforced AlSi10Mg composite: Microstructural, interfacial, and mechanical properties C Gao, Z Wang, Z Xiao, D You, K Wong, AH Akbarzadeh Journal of Materials Processing Technology 281, 116618, 2020 | 92 | 2020 |
Influence of powder properties on densification mechanism during spark plasma sintering C Yang, MD Zhu, X Luo, LH Liu, WW Zhang, Y Long, ZY Xiao, ZQ Fu, ... Scripta Materialia 139, 96-99, 2017 | 79 | 2017 |
Influence of ultrasonic surface rolling on microstructure and wear behavior of selective laser melted Ti-6Al-4V alloy Z Wang, Z Xiao, C Huang, L Wen, W Zhang Materials 10 (10), 1203, 2017 | 55 | 2017 |
Fabrication of biomedical Ti–35Nb–7Zr–5Ta alloys by mechanical alloying and spark plasma sintering LM Zou, C Yang, Y Long, ZY Xiao, YY Li Powder metallurgy 55 (1), 65-70, 2012 | 55 | 2012 |
Selective laser melting of nano-TiN modified AlSi10Mg composite powder with low laser reflectivity C Gao, Z Xiao, Z Liu, Q Zhu, W Zhang Materials Letters 236, 362-365, 2019 | 53 | 2019 |
Additive manufacturing of three-dimensional (3D)-architected CoCrFeNiMn high-entropy alloy with great energy absorption S Peng, S Mooraj, R Feng, L Liu, J Ren, Y Liu, F Kong, Z Xiao, C Zhu, ... Scripta Materialia 190, 46-51, 2021 | 50 | 2021 |
Equiaxed Ti-based composites with high strength and large plasticity prepared by sintering and crystallizing amorphous powder LH Liu, C Yang, LM Kang, Y Long, ZY Xiao, PJ Li, LC Zhang Materials Science and Engineering: A 650, 171-182, 2016 | 49 | 2016 |
Modified wear behavior of selective laser melted Ti6Al4V alloy by direct current assisted ultrasonic surface rolling process Z Wang, Z Liu, C Gao, K Wong, S Ye, Z Xiao Surface and Coatings Technology 381, 125122, 2020 | 46 | 2020 |
Effect of heat treatment on SLM-fabricated TiN/AlSi10Mg composites: Microstructural evolution and mechanical properties C Gao, Z Liu, Z Xiao, W Zhang, K Wong, AH Akbarzadeh Journal of Alloys and Compounds 853, 156722, 2021 | 44 | 2021 |
Characterization of spherical AlSi10Mg powder produced by double-nozzle gas atomization using different parameters C Gao, Z Xiao, H Zou, Z Liu, C Jin, S Li, D Zhang Transactions of Nonferrous Metals Society of China 29 (2), 374-384, 2019 | 42 | 2019 |
Die wall lubricated warm compacting and sintering behaviors of pre-mixed Fe–Ni–Cu–Mo–C powders ZY Xiao, MY Ke, L Fang, M Shao, YY Li Journal of Materials Processing Technology 209 (9), 4527-4530, 2009 | 41 | 2009 |
Laser powder bed fusion of crack-free TiN/Al7075 composites with enhanced mechanical properties W Wu, C Gao, Z Liu, K Wong, Z Xiao Materials Letters 282, 128625, 2021 | 30 | 2021 |
Investigation of microstructural evolution in a selective laser melted Ti6Al4V alloy induced by an ultrasonic surface rolling process Z Wang, C Gao, Z Liu, Z Wang, X Liu, K Wong, Z Zhou, Z Xiao Materials Science and Engineering: A 772, 138696, 2020 | 27 | 2020 |
Study on mechanical properties of warm compacted iron-base materials Y Li, TL Ngai, Z Xiao, D Zhang, W Chen Journal of Central South University of Technology 9, 154-158, 2002 | 27 | 2002 |
Effects of sintering temperature on microstructure and property evolution of Fe81Cu2Nb3Si14 soft magnetic materials fabricated from amorphous melt-spun ribbons by spark plasma … Z Xiao, C Tang, H Zhao, D Zhang, Y Li Journal of non-crystalline solids 358 (1), 114-118, 2012 | 26 | 2012 |
Study of amorphous phase in Fe100− x (NbTiTa) x alloys synthesized by mechanical alloying and its effect on the crystallization phenomenon Z Xiao, F Luo, C Tang, L Chen, TL Ngai Journal of non-crystalline solids 385, 117-123, 2014 | 23 | 2014 |
Formation of Fe–Nb–X (X= Zr, Ti) amorphous alloys from pure metal elements by mechanical alloying Z Xiao, C Tang, TL Ngai, C Yang, Y Li Physica B: Condensed Matter 407 (2), 258-262, 2012 | 20 | 2012 |
The microstructure and wear mechanism of a novel high-strength, wear-resistant zinc alloy (ZMJ) Y Li, J Luo, Z Luo, Z Xiao, TL Ngai Journal of materials processing technology 55 (3-4), 154-161, 1995 | 20 | 1995 |